MI Homesiding & Roofing
Most roof leaks around chimneys in Knoxville are caused by bad flashing — not the shingles.
At MI Homesiding & Roofing, I’ve repaired many homes where the roof was new, but water was still entering around the chimney. The problem is almost always poor installation or missing flashing behind the chimney structure.
If your roof is leaking near your chimney, this is not something that should be patched. It needs to be fixed correctly to stop the problem permanently.
Chimneys are one of the most vulnerable areas on any roof.
This is where different materials meet:
If this area is not sealed properly, water will find a way in.
In Knoxville, I regularly see chimney leaks caused by:
- missing step flashing
- improper counter flashing
- no flashing behind siding
- bad sealing with caulk instead of proper system
These are installation problems, not material problems.
Chimney leaks are not always obvious at first.
Common signs include:
- water stains near the chimney
- leaks after heavy rain
- moisture in the attic near chimney area
- damaged drywall or ceiling spots
- recurring leaks that were “fixed” before
If the leak keeps coming back, the flashing was never repaired correctly.
This is where most contractors fail — and where I focus.
I regularly repair:
Improper step flashing
Instead of layering flashing correctly with shingles, some installers skip steps, allowing water intrusion.
Missing counter flashing
Without counter flashing embedded into the chimney, water can run behind the system.
No flashing behind siding
Water gets trapped behind the wall and enters the home structure.
Temporary patch jobs
Caulking over the problem instead of fixing it properly.
Loose or damaged metal flashing
Flashing that is not secured correctly will shift and fail over time.
Chimney Leak Repair vs Temporary Fixes
Many homeowners are told their leak is “fixed” when it’s only patched.
Temporary repairs may stop water for a short time, but they don’t solve the real problem.
At MI Homesiding & Roofing, I don’t patch chimney leaks — I rebuild the flashing system correctly so it lasts.
If your chimney has been repaired before and still leaks, the problem was never fixed at the source.
Our Chimney Flashing Repair Process
Every chimney repair starts with a proper inspection.
My process includes:
Full inspection of chimney area
I identify where water is entering, not just where it shows.
Removal of incorrect flashing
I take out bad work that causes future problems.
Installation of step flashing
Proper layering with shingles to direct water away.
Counter flashing installation
Embedded correctly into the chimney for long-term protection.
Sealing and final protection
Everything is secured to handle Knoxville weather conditions.
Why Most Chimney Flashing Jobs Fail
Over the years, I’ve seen the same mistakes again and again.
Many contractors:
- rush chimney work
- skip step flashing
- rely on caulk
- don’t integrate flashing with siding
This leads to leaks even on new roofs.
Chimney flashing requires experience and attention to detail. If it’s not done right, the roof will fail in that area.
Homeowners call me because they are tired of leaks that keep coming back.
When you contact me:
- I answer the phone
- I personally inspect your roof
- I explain exactly what is wrong
- I fix the problem the right way
I’m not a big company sending random crews. I’m a local contractor focused on doing the job correctly.
Call Now for Chimney Flashing Repair in Knoxville TN
If your roof is leaking around your chimney, don’t wait.
Water damage spreads quickly and can lead to expensive repairs inside your home.
Call now for a professional inspection and get a clear, honest solution.
📞 Call Now: 865-243-1243
Serving Knoxville TN and surrounding areas including Farragut, Powell, and Oak Ridge.
Frequently Asked Questions – 🔻 FAQs
Most chimney leaks are caused by bad or missing flashing, not the shingles.
Yes. In most cases, the flashing system can be rebuilt without a full roof replacement.
Most chimney flashing repairs can be completed in one day.
Because it was likely patched, not properly repaired. The flashing system needs to be rebuilt correctly.
Yes. We provide detailed inspections to identify the exact cause of chimney leaks.