MI Homesiding & Roofing
Gutter Contractor in Morristown, TN
Builder-grade gutters failing after five years? Water over the front edge in a hard rain? Not sure whether five inch or six inch is right for your roof?
Seamless gutter installation, repair and replacement across Morristown, Tennessee — sized to the roof that drains into them, and formed on site in one piece.
Two Kinds of Morristown House, Two Different Gutter Problems
Most of the gutter work we do in Morristown falls into one of two groups, and they fail for opposite reasons.
The Highway 11E subdivisions
Newer homes, built quickly, where the gutter was the last trade on site and priced to the penny. The trough is often the smallest that would pass, with as few outlets as the elevation allowed and a slope set by eye. It works for a few seasons. Then the fasteners loosen, the fall flattens out, and water starts standing in the run and going over the front in anything heavier than ordinary rain.
The older homes closer to downtown
Different problem entirely. The roofline has been altered over the years — a porch added, a dormer changed, a section re-covered — and the gutter no longer matches the roof it is supposed to catch. The fascia behind it may be original timber that has been painted over several times. Here the question is rarely "what size", it is "where does this water actually go, and what is this run screwed into".
We quote them differently because they need different work. On a 11E house the answer is usually capacity and outlets. On an older house it is usually the line of the gutter and the condition of the board behind it.
What Homeowners Say About the Work
Reviews below come straight from our Google Business Profile. They are not retyped, edited or selected by us.
Verified credentials
Who you are actually hiring, and who stands behind the gutters.
- TN #13334Licensed & Insured
Licensed Home Improvement Contractor
Tennessee license #13334 · General Liability and Workers’ Compensation insured
BBB Accredited Business — A+ Rating
- 20+Years Hands-On
Experience on the Tools
More than 20 years of hands-on construction and exterior remodeling experience · family owned and operated, bilingual English and Spanish
- 5 YearsWorkmanship Warranty
Our Own Warranty on the Work
Five years on a complete replacement and one year on a repair, covering how it was installed — our labor and our details.
Five Inch or Six Inch? What Actually Decides It
More Morristown homeowners ask us this directly than anywhere else we work, so here is a straight answer: there is no rule that says a house needs six inch gutters. Anyone who quotes you one without looking at the roof is guessing.
What a gutter has to handle depends on the whole system — how hard it is raining, how much roof area drains into that particular run, how steep that plane is, how concentrated the water is by the time it reaches the eave, how wide the trough is, how big the outlets are, how many downspouts there are and where they sit, where the gutter sits relative to the roof edge, and whether a leaf guard is in the way.
A six inch K-style does hold materially more than a typical five inch, and it takes a larger outlet, which is often the part that actually matters. We recommend it where the geometry and the expected volume justify it. On a simple roof with short runs and enough downspouts, five inch is frequently the right call and the cheaper one.
The question worth asking instead: how much roof drains into this run, and how many outlets does it have? A long run with one downspout at the far end will struggle at any size. Two properly placed outlets on a five inch run will often outperform one on a six inch.
Builder-Grade Gutters and Why They Fail Early
When a gutter that is only a few years old is already overflowing, it is almost never worn out. It is usually one of these.
- Not enough fall. Set by eye rather than measured, so water stands in the middle of the run instead of moving to the outlet.
- Too few outlets. One downspout doing the work of two, so the trough fills faster than it can empty.
- Hanger spacing stretched. Fewer brackets means a cheaper install and a run that sags between them once it carries water.
- Spikes and ferrules instead of hidden hangers. They work loose, and the gutter tips forward at the top.
- Outlet in the wrong place. Often at the high end of the run rather than the low end.
None of these need a full replacement to fix. Re-hanging a sound gutter with proper fall and the right number of outlets costs a fraction of replacing it, and it is the honest answer more often than people expect. We will tell you when that is what you are looking at.
Older Rooflines, and the Board Behind the Gutter
Closer to downtown the houses have usually been changed more than once. A porch roof added in one decade, a dormer altered in another, a rear section re-covered at some point in between. Each of those changes moved where water arrives at the eave, and the gutter was rarely re-planned to match.
What that produces is a run that is perfectly sound but in the wrong place for the roof above it — catching the main field fine and missing the valley entirely, or ending a few feet short of where the water is actually concentrated. No amount of extra capacity fixes a gutter that the water is bypassing.
The second thing we look at on these homes is what the run is screwed into. Fascia on an older Morristown house is often original timber that has been painted rather than replaced, and paint hides a great deal. We check the board where each hanger lands before quoting, because putting new gutter onto failing fascia is money spent twice. If we find rot, we document it with photographs and give you a written change order before anything else happens — we do not cover hidden damage behind new work without telling you first.
Formed on Site, in One Piece
Seamless gutter is rolled from flat coil on the truck at your house and cut to the exact length of the run. The only joints in the finished system are at the corners and the outlets, which is where sealant belongs. Sectional gutter, by contrast, has a joint every few feet, and every one of those is somewhere a seal can eventually fail.
That is the real argument for seamless, and it is worth being precise about it: it is not that seamless gutter cannot leak. It is that it has far fewer places to leak from, and the places it does have are the ones we can detail properly.
Color is matched to the trim rather than to the siding, which is usually what people expect but not always what they are offered.
Repair, Re-hang or Replace
In most of the towns we work in, replacement is the common answer. In Morristown it is usually not, and that is worth saying plainly because it is the cheaper outcome.
A large share of the gutter on the newer side of town is only a few years old. The aluminum is fine. What is wrong is how it was hung — the fall, the bracket spacing, the number of outlets and where they sit. Resetting those things on an existing run is a fraction of the cost of tearing it off, and it solves the overflow that prompted the call.
Replacement earns its place when the trough itself is finished: corroded, repeatedly split, visibly deformed from a ladder or a limb, or genuinely too small for the area draining into it. It is also the sensible call when the fascia has to come off anyway, since the gutter is coming down either way.
Repair sits between the two — one bad seam, one separated downspout, one damaged length, an outlet moved to the correct end of the run. We will tell you which of the three your house needs, and we would rather say "this can be re-hung" on the first visit than sell you a system you did not need. See also gutter repair, sagging gutter repair and gutter replacement.
Keeping a Morristown System Working
The two halves of town need watching for different things, and a single maintenance schedule serves neither of them well.
On the newer subdivisions
The trees are young and drop little, so blockage is rarely the issue. What catches people out is that a guard was often fitted at build time, and a guard changes how the system behaves: some designs limit how fast water can enter the trough in heavy rain, which can look exactly like a blockage while the gutter is in fact clean. If a guarded run is going over the front, the guard belongs in the diagnosis rather than outside it.
On the older streets
The opposite. Mature trees directly over the roof, and runs that fill faster than anyone expects — particularly in the few weeks when they shed. Here the useful question is not how often, but what is overhead and when it drops.
What is worth acting on, either side of town
- Water over the front edge in rain that never used to cause it
- Staining down the outside face of the trough
- Anything growing in the gutter
- Grit washing out of the bottom of the downspout
Cleaning is its own service — see gutter cleaning. If a run is already blocked or spilling, that is clogged gutter repair, and for what a guard will and will not do, see gutter guards.
What It Costs, and What the Figure Covers
| Item | Price |
|---|---|
| Seamless gutter, supplied and installed | $15.25 / linear foot |
| Downspout, supplied and installed | $15.25 / linear foot |
| Each elbow | Counts as 1 ft |
| Technical Assessment, if one is needed | $350, credited back |
The linear-foot rate covers the gutter and downspout work itself. Elbows are counted as one foot each rather than priced separately, so a quote is straightforward to check against the measurements of your own house.
The $350 Technical Assessment is not charged on every job. It applies where the cause genuinely needs investigating rather than quoting — water appearing somewhere that does not line up with the run above it, for example. If you go ahead with the work, that $350 is credited back against it.
Repair pricing depends on what the repair is, so we quote it after looking rather than from a list. For how gutter pricing works more generally, see gutter cost.
Financing Available
Financing is available through a third-party lender for homeowners who would rather spread the cost. Approval, rates and terms are set by the lender, not by us, and we make no promise about what you will be offered.
On standard projects we take 33% at signing, with the balance structured around the work. The payment schedule is set out in writing before anything starts.
Permits and Codes in Morristown and Hamblen County
Morristown is simpler than most of the places we work, and it is worth knowing why. The City of Morristown states that it enforces the 2018 International Building, Residential, Mechanical, Plumbing, Existing Building, Fuel Gas, Energy, Property Maintenance and Swimming Pool and Spa codes, together with the 2017 National Electrical Code and the 2018 NFPA fire code. Hamblen County adopted the 2018 International Building, Residential, Energy Conservation, Fire, Plumbing, Mechanical, Fuel Gas and Swimming Pool and Spa codes on 24 March 2022.
In other words, both sides are on the same 2018 editions, so unlike some neighboring counties the answer does not change when you cross the city line. The city runs its own Building Inspections department and can be reached on (423) 581-0100.
On whether gutter work needs a permit: neither the city's nor the county's published code pages mention gutters, soffit or fascia one way or the other, and we are not going to tell you it is exempt on their behalf. If a job reaches the point where it is a fair question, we will raise it, and the number above is the one that settles it for your address.
Gutter Questions From Morristown Homeowners
Do I need five inch or six inch gutters?
It depends on the roof, not on a rule. The things that decide it are the roof area draining into that run, how steep it is, how concentrated the water gets, how many downspouts there are and where, and whether a guard is fitted. A six inch K-style holds materially more and takes a bigger outlet, and we recommend it where the geometry justifies it. On a simple roof with enough outlets, five inch is often right and cheaper.
My gutters are only a few years old and they already overflow. Why?
Almost never wear. Usually not enough fall, too few outlets, hangers spaced too far apart, spikes that have worked loose, or an outlet at the wrong end of the run. Most of those are fixable by re-hanging rather than replacing.
Can you re-hang my existing gutters instead of replacing them?
Often, yes, and it costs a great deal less. If the trough is sound and the fascia behind it is solid, resetting the fall and adding outlets where they are needed usually brings the system back. We will say plainly when that will not hold.
What does seamless actually mean?
The gutter is rolled from flat coil at your house and cut to the exact length of the run, so the only joints are at corners and outlets instead of every few feet. Fewer joints means fewer places a seal can eventually fail.
Is the fascia included in a gutter quote?
Not automatically, because we cannot see what is behind the gutter until it comes off. We check the board where the hangers land before quoting, and price any work it needs then rather than discovering it mid-job.
Do you work outside the Morristown city limits?
Yes, across Hamblen County and the surrounding area. Both the city and the county are on the 2018 code editions, so that part of the answer does not change at the city line.
What warranty comes with the work?
Our workmanship warranty is five years on a replacement and one year on a repair. It covers our workmanship and is not transferable. Any manufacturer warranty on the material itself is separate and comes from the manufacturer on their terms.
Serving Morristown & Nearby
We install, repair and replace gutters across Morristown, Tennessee — the older streets near downtown, the subdivisions along Highway 11E, and the properties out toward Cherokee Lake — and in the communities around it: Jefferson City, New Market, Dandridge and Newport.
Working on more than the gutters? Our Morristown exterior contractor page covers the whole exterior, and there are dedicated pages for roofing in Morristown and siding in Morristown. For how the system works in general, see our gutter services page.
Ready to Get Started?
Tell us what the water is doing and we will come and look at it. If re-hanging will hold, that is what we will quote.
TN #13334Licensed & insuredBBB A+Accredited business5-YearWorkmanship warranty20+ YearsHands-on experience