MI Homesiding & Roofing
Knoxville, TN
Gutter Cost in Knoxville, TN
Our gutter pricing is one rate per linear foot, published right here. Pick what you need for a planning ballpark, or let us measure it for you.
Ballpark estimator
Pick what you need. Watch the range.
No measuring tape required to get started. Nothing is added behind the scenes — every figure is your footage times $15.25, and you can check the arithmetic yourself.
1What do you need?
2About how much gutter?
3Downspouts
Know your downspout footage?
Gutter down to the ground, added up.
Each elbow counts as 1 linear foot at $15.25.
Your ballpark
$3,050 – $4,575
Gutters200–300 LF
Final price depends on actual measurements, system layout, access, and project conditions.
Get my actual estimate → (865) 243-1243
Verified credentials
Who you are actually hiring, and who stands behind the work.
BBB Accredited Business — A+ Rating
- TN #13334Licensed & Insured
Licensed Home Improvement Contractor
Tennessee license #13334 · General Liability and Workers’ Compensation insured
How we price gutters
One rate, measured on your house.
Most gutter pricing arrives as a range wide enough to mean nothing. Ours is a single published rate applied to footage we measure on site, so the quote you get is the arithmetic you can already do here.
01
We measure, not estimate
Every roof edge and downspout run is measured on site. No pacing the driveway, no rounding up to the next ten feet.
02
Elbows are counted honestly
Each elbow is billed as one linear foot at the same rate. You can count them yourself and check the number.
03
Conditions are quoted separately
Fascia repair, guards, and cleaning are their own line items. They are never folded into the per-foot rate.
Current MI rates
What we charge by the foot.
| What we measure | Price |
|---|---|
| Gutter | $15.25 / linear ft |
| Downspout | $15.25 / linear ft |
| Each elbow | Counts as 1 linear ft |
Gutter guards, gutter cleaning, and fascia replacement are priced separately once we have seen the house. We do not publish a figure for work we have not measured.
What moves your total
Why two houses on one street price differently.
Total measured footageThe single biggest factor. Longer rooflines and more downspout runs mean more feet.
Downspout and elbow countA roof that needs more outlets needs more downspout and more elbows, and both are measured feet.
System layoutCorners, valleys, and multi-level rooflines change how many runs and outlets the system takes.
AccessTwo-story runs, steep ground, and tight side yards change how the crew has to work.
What is behind the old gutterFascia condition is not visible until the old run comes off. If it needs work, that is quoted before we continue.
Repair or replace
Replacing the whole system is not always the cheaper answer.
Repair is often enough
Water spilling at one spot is usually pitch, a clog, or an outlet in the wrong place. Re-hanging a section or adding a downspout can solve it without touching the rest of the system.
Replacement earns its cost
When the runs are undersized for the roof, the fascia behind them is failing, or repairs have already been made more than once, new gutters stop paying for the same problem twice.
We tell you which one your system needs after we have looked at it. We do not quote a replacement for a problem a repair would fix. For the full decision guide, see gutter replacement or gutter repair.
5-inch vs 6-inch
Size is a drainage decision, not a price tier.
Both are standard residential K-style sizes. Which one your house needs comes from how much roof drains into each run, the roof pitch, and how many downspouts the system has — not from a budget bracket. For the full comparison, see seamless gutter installation.
Our per-foot rate is published aboveWe price gutter by the measured linear foot. Any difference in your total comes from footage and the number of outlets, not from a separate rate card per size.
Bigger is not automatically betterA larger profile on a roof that drains fine already adds cost without solving anything.
Sometimes the fix is an outlet, not a sizeAdding a downspout can resolve overflow that a larger gutter would not.
Estimates and minimums
What an estimate costs, and the smallest job we take.
$350
Technical AssessmentOn-site estimates are free for standard projects. For complex inspections — active leaks, previous repair work, or conditions we cannot verify from the ground — we charge $350, credited back in full if you move forward.
$790
Minimum job sizeA short run of gutter or a single downspout can price out below this at the per-foot rate. One trip covering the visit, materials, and labor starts at $790.
Structural integrity & hidden damage policy
Damaged fascia gets addressed in a written Change Order before new gutters go up over it.
New gutters hung on rotted fascia will pull loose again, usually within a season and usually taking more of the board with them. So we do not do it. What is behind the old run is the one cost nobody can quote from the ground.
If rotted fascia, soffit damage, or hidden water intrusion is found during the project, we stop, document it with photos, explain what we found, and issue a written Change Order before work continues.
Gutter services
The work these prices pay for.
Serving Knoxville and Surrounding East Tennessee
The rates on this page apply across the area we serve. Wherever your home is, the estimate works the same way: we measure the gutter and downspout footage on site, count the elbows, and give you the written price before any work begins.
Gutter cost questions
Frequently asked questions
How much do gutters cost in Knoxville?
Gutter is $15.25 per linear foot and downspout is the same rate, with each elbow counted as one linear foot. Your total is that rate times the footage we measure on site. Minimum job size is $790 when a site visit is required.
Does a downspout cost more than gutter?
No. Downspout is the same $15.25 per linear foot as gutter. Each elbow is billed as one linear foot at that rate, so a downspout with three elbows adds three feet to the measurement.
How do you measure for a gutter quote?
We measure every roof edge that carries a gutter, measure each downspout run from the gutter to the discharge point, and count the elbows. Nothing is paced out or rounded up, and the measurements are on the estimate.
Do 6-inch gutters cost more than 5-inch?
We publish one per-foot rate for gutter. Which size your house needs is a drainage decision based on roof area, pitch, and downspout count. We measure on site and tell you which size the roof actually calls for.
Is the estimate free?
On-site estimates are free for standard projects. For complex inspections such as active leaks, previous repair work, or conditions we cannot verify from the ground, we charge a $350 Technical Assessment, credited back in full if you move forward.
What if there is rot behind my old gutters?
We stop and document it with photos, explain what we found and why it matters, then issue a written Change Order before continuing. Rotted fascia gets addressed before new gutters go up over it, and a known problem does not get absorbed silently into the finish — it goes into a written Change Order you approve.
Get a free gutter estimate
Let us measure it, and you will have the real number.
The ballpark gets you close enough to plan. The estimate gets you exact linear footage, downspout and elbow count, and a written price.
Call (865) 243-1243 or send the form and we will get back to you.
Licensed Home Improvement Contractor · Workers’ Comp & Liability Insured · BBB Accredited Business, A+ Rating · Family Owned & Operated · Bilingual English & Spanish