
MI Homesiding & Roofing
When the frame is the problem, new boards will not fix it. We tear the old deck off, rebuild the structure to code, and put the surface back on something that will hold it.
We replace decks of every age in Knoxville. Some are twenty or thirty years old and have simply been worn down by Tennessee summers. Others are almost new — built in the last few years by someone who skipped the steps that matter, and already failing.
Recently we were called to replace a set of almost-new deck stairs that had been built without proper stringer spacing or support.
Humidity is what finishes a deck here. It is the enemy of wood — rain dries, but the humidity never leaves, and the water that sits in a joint does not evaporate.
Our team has been doing carpentry since 2004, so we understand wood: how it moves, where it holds water, and which joints fail first. We check the ledger, the posts, the joists, the footings and the wall connection before we price anything. We answer every call.

Soft boards, loose railings, bad stairs, and ledger problems — when the frame is still solid.
Learn more →Full tear-off and rebuild when the ledger is failing, posts are rotting, or the frame is moving.
Smaller new decks, covered patios and porches — built with proper framing and drainage.
Learn more →A roof over the deck or patio, tied into the wall with flashing rather than set on top of it.
Closing in an existing porch, or a smaller new one, with framing and screen that hold up outdoors.
See completed deck work across Knoxville and East Tennessee.
View gallery → 🪙Stringers, treads, and railings built to code — the part of a deck that fails first.
Learn more → 🛡Loose posts and wobbly rails are a safety issue, not a cosmetic one.
Learn more → 💲Real price ranges for Knoxville, and what actually moves the number.
Learn more →Verified credentials
Who you are actually hiring, and who stands behind the work.

BBB Accredited Business — A+ Rating
Licensed Home Improvement Contractor
Tennessee license #13334 · General Liability and Workers’ Compensation insured

Knoxville Chamber Investor
Investor member of the Knoxville Chamber





The ledger board is the piece bolted to your house that carries one entire side of the deck. Two things go wrong with it. The first is attachment: the board is nailed instead of bolted, or fastened into siding rather than into the framing behind it. The second is water: there is no Z-flashing behind the siding, so every drop that runs down the wall sits against that board.
The ledger has to be bolted to the rim joist — the band board that runs around the house on edge, sitting on the treated sill plate, where the floor joists of the house are tied in. That is the part of the house built to carry load. Siding is not. When we find a ledger hung on the siding, the deck is really only hanging on nails.
On a replacement this is the part we will not compromise on. The ledger gets bolted into framing and flashed properly. If the wall behind the deck has already been wet long enough to do damage, that gets dealt with before the new deck closes it back up.
Most of the decks we replace were not built badly on purpose. They were built to the standards of the day, or built fast, and then left to sit through East Tennessee humidity.
Framing lumber that was never rated for exterior exposure or ground contact, carrying the whole structure.
Joists toe-nailed into the beam instead of sitting in a joist hanger. The nails loosen and the joist drops.
The board that carries the deck fastened through the siding instead of into house framing, with no flashing behind it.
A post dropped in a hole and poured around. The concrete holds water against it, and the post rots from the inside at ground level.
Framing that was never set level, or has settled since, so the deck reads crooked and the stairs lose their equal risers.
No Z-flashing behind the siding, so water sits against the ledger board.

Three or four of them together is a replacement, and we will say so. Once moisture has reached the wall it can become water behind siding repair or rotted siding repair.
That is not a loophole, and it is not an excuse to add to the bill at the end. It is why the estimate carries an allowance for what the tear-off finds.
No surprises at the end. That is the whole point of doing it this way.
If rot, damaged framing, ledger failure, or moisture damage is found, we document it with photos and explain the next step. A written Change Order is issued before extra work continues.
Boards are the cheapest part of a deck and the easiest to see. Joists, beams, posts and the wall connection are the expensive part, and the part nobody looks at. A deck can look terrible and be sound, or look fine and be unsafe.
Cost depends on size, height, material, railings, stairs, access, and the condition of what is coming off. These ranges reflect real East Tennessee projects.
| Deck Service | Typical Range |
|---|---|
| Deck resurfacing / re-skin | $3,500 – $9,500 |
| Structural deck repair | $2,500 – $12,000+ |
| Wood deck replacement | $8,700 – $17,400 |
| Composite deck replacement | $13,700 – $33,000 |
On-site estimates are free for standard deck work. For complex inspections that need deeper review — framing analysis, moisture checks, and ledger inspection — we charge $60 to $350, credited back in full if the project moves forward.
📞 (865) 243-1243A deck replacement is a real investment, and paying for all of it up front is not always the right move. Financing is available through our lending partner, so the footings, the ledger and the framing get built properly rather than trimmed down to fit a cash figure.
Applications are reviewed by the lender. Approval, terms, and rates are set by them, not by us.
We work with pressure-treated wood, Trex, AZEK and TimberTech, plus railings and stairs. Any of those surfaces performs well — but only when what is underneath was built right. Coverage on the boards, fasteners and hardware comes from those manufacturers rather than from us.
Our team has been doing carpentry since 2004, and that is the part that never shows up in a brochure: we understand wood.
Works well when framing, flashing, and drainage are handled correctly. Lower material cost, more upkeep over time.
A cleaner surface with far less maintenance. It is also heavier than the wood it replaces, which is why the frame gets checked for the new load first.
Rail posts anchored into framing, not just fastened to the rim. Stairs with equal risers and stringers that are actually supported.
Nothing goes back on until what is under it has been checked. Every line below is itemized in the written estimate, and the permit is its own line rather than folded into a lump sum.
The old deck comes off down to whatever we are keeping. We bring our own dumpster, and the old material leaves with us.
Set to the depth the code requires, on footings, with the post secured to the footing — not dropped in a hole and poured around.
Beams, joists and metal hangers sized and spaced for the span, with hardware rated for treated lumber.
The ledger bolted into house framing and flashed, so water runs back out instead of in.
The part you see, going down on a frame that has been checked and can carry it. Then a walkthrough with you.
Deck ledger board repair is usually the first thing we check.
📞 (865) 243-1243Local weather matters here. Humidity, rain, heat, and seasonal movement put real pressure on deck framing — and we see the same failures repeat across these communities.
Working in Farragut specifically? Our deck contractor in Farragut page covers the Town of Farragut permit, its fee schedule, and the Knox County amendments that apply to deck footings, posts and stairs.
In Oak Ridge, where much of the original housing dates from the 1940s and the decks were added later, our Oak Ridge deck contractor page covers retrofitted ledgers and the hillside lots that turn a single step down into a structure on posts.
Knox County and the City of Knoxville have both adopted the 2018 International Residential Code, and decks are governed by its Section R507. On a replacement, these are the parts that decide whether what goes back is sound:
Do you need a plan? For a straightforward replacement on the same footprint, usually not. Where drawings are provided, we review the dimensions, layout and framing details shown on the plans, which helps us understand items such as joist layout, footing locations and railing runs before materials and installation are planned.
Do you need a permit? A deck replacement generally does. Which office issues it depends on the address: the City of Knoxville inside the city limits, Farragut’s own office in Farragut, and Knox County Codes Administration elsewhere in the county. We confirm what your address requires before the proposal goes out, and the permit goes on the estimate as its own line.
Will an inspector come out? Where the permit calls for inspection, yes, and we schedule it. Framing and footings are typically looked at before the surface goes on — another reason the structure gets built right rather than covered up.
What the written estimate itemizes. Deck area and shape, the framing — joist size and spacing, beam and post sizing — footings and their depth, how the deck attaches to the house and how that connection is flashed, the decking product and its fastening method, railings and stairs, the permit, and an allowance for structural work found once the surface is off. Where two deck quotes differ sharply, the gap is almost always in the framing, the footings and the ledger connection — the parts nobody sees once the boards go down.
How long it takes. Three days to one or two weeks, depending on the size of the deck. That is the normal expectation rather than a guarantee: access to the work area, weather, permit and inspection scheduling, hidden structural damage found once the surface comes off, any change orders, and material availability all move it. The schedule goes in the written proposal.
Our workmanship warranty. Deck work carries a five-year limited workmanship warranty, subject to the signed agreement and the scope of work defined in it. Manufacturer coverage on the decking boards, fasteners and hardware is separate and comes from those manufacturers rather than from us.
Paying for the work. Financing options may be available through a third-party financing partner, subject to approval and the provider’s terms. MI Homesiding & Roofing is not the lender, and the rates and terms come from the provider.
Licensed Home Improvement Contractor (TN #13334) · City of Knoxville Building Contractor (#BC13334) · BBB Accredited with an A+ rating · Workers’ Compensation and General Liability carried · family owned and operated, bilingual English and Spanish · 20+ years of hands-on construction and exterior remodeling experience · Google Reviews.
The cheapest replacement is the one that leaves the structure where it is. This is what we find when that deck comes off a few years later.
New boards screwed onto joists that were already failing. The surface looks new and the structure is the same age.
The old posts carried a lighter deck. Composite is heavier, and nobody checked.
The one connection that carries a whole side of the deck, left exactly as it was.
The wall gets closed back up over the same problem that caused the first failure.
Tear-off and disposal priced out of the job, so it becomes your problem.
On a replacement the order matters more, because everything is open. Nothing goes back on until what is under it has been checked.
Ledger, joists, beams, posts, footings, stair framing and the rail connections.
Itemized, with the permit on its own line and an allowance for what the tear-off finds.
Footings, posts, frame and the wall connection, in that order.
Boards, railings and stairs on a frame that has been checked and can carry them.
We go over the finished deck with you. We answer every call.
Three days to one or two weeks, depending on the size of the deck. That is an expectation rather than a guarantee — access, weather, permit and inspection scheduling, hidden structural damage found once the surface comes off, change orders and material availability all move it. The schedule goes in the written proposal.
It depends on what the frame is doing, not on how the surface looks. If the joists, beams, posts, footings and ledger check out, we can keep the structure and replace the surface and railings — that is a re-skin, and it runs $3,500 to $9,500. If the ledger is failing, the frame is moving or posts are rotting, the structure comes out too.
Generally yes. Knox County and the City of Knoxville have both adopted the 2018 International Residential Code, and deck work falls under its Section R507. We confirm what your specific address requires before the proposal goes out, and the permit is itemized on the estimate as its own line.
We photograph it, explain what it means, and issue a written Change Order before any extra work continues. Hidden rot or ledger failure found during tear-off is never absorbed silently into the finish, and it is never added at the end without your approval.
Yes. We install pressure-treated wood, Trex, AZEK and TimberTech. A composite surface is heavier than the wood it replaces, so the framing gets checked for the new load before anything goes down. Coverage on the boards and hardware comes from those manufacturers rather than from us.
Deck work carries a five-year limited workmanship warranty, subject to the signed agreement and the scope of work defined in it. Manufacturer coverage on the decking boards, fasteners and hardware is separate and comes from those manufacturers.
Many deck projects overlap with other exterior work. Save time and coordinate one company for the whole job.
The ledger sits against the wall, so deck trouble and siding trouble usually arrive together.
Learn more →02Water coming off the roof has to go somewhere other than the deck footings.
Learn more →03Staining the deck and painting the trim at the same time saves a second mobilization.
Learn more →Where drawings are provided, we review the dimensions, layout and framing details shown on the plans. That helps us understand items such as joist layout, footing locations and railing runs before materials and installation are planned.
Soft, bouncy, loose, rotted, or pulling away from the house? Do not wait. Deck problems do not stay small. They spread into the siding, the wall, the framing, and eventually the interior of the home. On deck work we act as your general contractor: one company, one point of contact, and we manage every part of the job from the footings to the final walkthrough.
Call now for a free deck estimate, or use our contact form to schedule an inspection. We answer every call.